roll forming machine
Call Us
0086 317 8312992
Opening Hours
24hours everyday
Sandwich Panel Production Line Home > Sandwich Panel Production Line
Metal Sandwich Panel The Pack Roof Sandwich Machine Sandwich Machinery
  • Metal Sandwich Panel The Pack Roof Sandwich Machine Sandwich Machinery
  • Metal Sandwich Panel The Pack Roof Sandwich Machine Sandwich Machinery

Metal Sandwich Panel The Pack Roof Sandwich Machine Sandwich Machinery

A. Our Advantage

1.PLC Automatic Computer Control
2.Operation Easy
3.Running Is Safe Steady And Reliable
4.Lifetime Repair Guarantee
$38000.00
INQUIRY
 

ABOUT THE PRODOUCTION

Requirements for Factories:
The factories where our EPS sandwich panel production line are applied can be either flatroof or sloped-roof type. The height of the cornice should be larger than 5m, and the effective width should be at least 45m. The floor of the factory should be flat and concrete. For foundation of the roll forming line, it is required to be to be 380V, and the total installed power is 34kw. It is necessary for the factory to be equipped with 0.4-0.6MPa compressed air supply and illumination devices. The roll forming machine shares the same power supply with the auxiliary devices. The fluctuation of voltage should be no more than 10%, or it may lead to an abnormal running of the system.
 
The stroke is no less than 29m, the load for a lifting process is larger than 5000kg, and the lifting height is no less than 3.9m. For daily production and maintenance, about 6-10 people are needed, with 3-4 operators for some core processes included.




 
Review


1/3
X